MyChron 6 analysis
Analyze MyChron 6 data without scanning graphs
The MyChron 6 is the newest AiM kart dash and records more than ever. Tenth Finder cuts through it to the few corners that actually decide your lap time — and tells you what to try next.
3 free analyses. Also supports MyChron 5 and MyChron 5S.
What the MyChron 6 records
The MyChron 6 is the latest generation, with more onboard room for data and the same core a driver needs: GPS position, speed, RPM, and lap times. More data is only useful if you can act on it before the next run.
Tenth Finder starts from the speed trace — where your speed drops, your minimum corner speeds, and how well you build speed back on exit — and turns it into a short, ranked list of what to fix.
More data in, a clear plan out
The 6 gives you plenty to look at. Tenth Finder gives you somewhere to start.
Track map, losses marked
A map built from your own 6 GPS data, with the corners that cost the most time marked so the pattern is obvious at a glance.
Ranked corner losses
The biggest 2–3 losses, sorted, so you spend the day on the corners that actually pay you back.
Optional: session comparison
Add a second session from the same track — yours, or one from a faster driver — and Tenth Finder lines the two up, best lap to best lap.
Plain-language driving notes
What the speed trace suggests — over-slowing on entry, a low minimum, a weak exit — grounded in your data, offered as starting points rather than promises.
Try it with your own MyChron 6 session
Connect over Wi-Fi at the track, upload a session, and get a clear read in minutes.
On MyChron 5 or 5S too? Same workflow
Upgraded to the 6, or still running a 5 or 5S? Tenth Finder supports all three, and the workflow does not change: connect over Wi-Fi, pull the session, and run the analysis on your phone.
Tenth Finder is independent and is not affiliated with or endorsed by AIM.
Frequently asked questions
Does Tenth Finder support MyChron 6?
Yes. Tenth Finder reads MyChron 6 sessions. Connect over Wi-Fi at the track, pull the session into the app, and run the analysis on your phone.
Is the MyChron 6 workflow different from the 5 or 5S?
No. The 6 records more, but the steps are identical: connect over Wi-Fi, pull the session, and run the analysis. Tenth Finder reads the same GPS, speed, and lap data it uses on every model.
Does it also support MyChron 5 and MyChron 5S?
Yes. MyChron 5, 5S, and 6 are all fully supported.
Do I need to export files from the 6?
No. Connect over Wi-Fi at the track and pull the session straight into the app — no laptop, no cables, no manual export step.
Can I use it between sessions at the track?
Yes. Tenth Finder runs on your phone and is built for the few minutes between runs, so you can get a read on your last session before heading back out.
Upload MyChron 6 data and see where you lost time
3 free analyses. No subscription. No credit card required.
Related guides
How to analyze MyChron 5 data →
Skip the graph-digging. Turn MyChron 5 data into corner losses and clear driving feedback.
How to analyze MyChron 5S data →
Your 5S logs extra channels — Tenth Finder cuts to the speed trace and the corners costing you time.
Compare two MyChron sessions →
See where time was won or lost between two sessions, corner by corner.